A DIY nightstand is a great way to organize extra items if you have spare space or a place you can store them. With some basic plans, you can build a functional storage system for under your mattress. Magnetic locks can be installed on either one or both of the compartments. After you have completed the project you can make it more personal by adding foam inserts to the top and bottom compartments.
Make a DIY nightstand using a drawer and hidden compartment
To build a DIY nightstand with a drawer, you will first need to cut onex12 boards to the correct lengths. Side panels should be measured consistently to ensure that they fit together tightly. Mark the tenon points on each side of the boards to ensure that your drawers are square. Then, glue the pieces together and secure with finish nails.
You can also use Ikea furniture to create a DIY nightstand. These pieces are versatile and easily adaptable. These pieces are also great for creating books and other useful items. They are also very affordable and you can easily make them yourself if enough wood is available. You can have them customized and made to suit your room's decor.
Install a locking device
Hidden compartment nightstands have two drawers. Because it has two compartments that are hidden beneath and above the main drawer, this nightstand can be used to secure valuables. Each compartment offers a different access route to the compartment and both can be locked when closed. The nightstand is undetectable from the outside and has the look and feel of a typical nightstand.
To install a maglock, you need to drill one small hole in the top of or bottom compartment of your nightstand. Once the hole has been drilled, place the magnet lock in the designated spot on the compartment's front. To open the drawer, push one magnet on each side of the magnet. You can find a hidden magnetic lock in hardware stores and online. This step is optional.
For the top and/or for bottom compartments, add foam inserts
You can add two storage pockets to your nightstand if you want more space. The top compartment measures 13 inches by 2 inches, while the bottom compartment measures 13 inches by 2.5 inches. Both compartments have felt-lined internals. Hidden compartment nightstand plans are accessible via a two step system. For additional storage space, optional foam inserts may be added to the top drawers or bottom drawers.
FAQ
What is the difference between plywood and particle board?
Plywood is made up of layers of wood pressed together under pressure. Plywood can be cut to different thicknesses. It's commonly used as flooring and cabinets. Particle board is made up of sawdust mixed in resin, then compressed into large pieces. It's often used for home renovation projects. Both boards can be cut easily and are both durable.
What wooden items sell well?
These wooden products are the most popular. They were made from sustainably harvested wood.
Most furniture is made from oak, maple, mahogany or walnut.
These woods have beautiful grain patterns and colors. They are also very strong. If they are well cared for, they can last many years.
To protect wooden furniture from moisture damage, you should paint it first. This applies to all surfaces, even drawers and doors.
You want your furniture to last as long as possible so you need to choose a paint that is water resistant.
It is recommended to use an oil-based primer, then apply two coats. Depending on the amount of wear, you may need several coats.
You should avoid using aerosol paints or spray cans. These products are contaminated with solvents, which evaporate rapidly and can leave behind toxic fumes.
What would be your first step in woodworking?
Start with softwoods, such as pine or poplar. After you are comfortable with the softwoods, move to hardwood.
Statistics
- Average lumber prices rose about 600 percent between April 2020 and May 2021. (familyhandyman.com)
- Overall employment of woodworkers is projected to grow 8 percent from 2020 to 2030, about as fast as the average for all occupations. (bls.gov)
- Most woodworkers agree that lumber moisture needs to be under 10% for building furniture. (woodandshop.com)
- If your lumber isn't as dry as you would like when you purchase it (over 22% in Glen Huey's opinion…probably over 10-15% in my opinion), then it's a good idea to let it acclimate to your workshop for a couple of weeks. (woodandshop.com)
External Links
How To
How do I accurately measure wood?
We use many methods to measure wood. We use a digital caliper (a tool used to measure distances), a laser level (used to make sure your work surface is flat), and a bubble level (used to make sure your work surface is perpendicular).
A digital caliper has two jaws that open and close. One jaw holds a measured object and the other measures distances between the points. Digital calipers are great for measuring small distances, such as thicknesses of wood.
Laser levels are equipped with an infrared light beam, which projects a line across a floor. The laser emits a red dot along the line. The line can be viewed down to determine if the surface has an even surface. Large surfaces can be checked for accuracy with laser levels.
Bubble levels look similar to a compass. The center of the device contains a bubble. As long as the bubble is centered, the device will tell you whether the surface is level or not. Bubble levels are great for checking the accuracy and precision of smaller areas.